Ventilation aging test chamber

Product information

Ventilation aging test chamber is an experimental equipment used to accelerate the aging process of test materials in a specific gas environment. It mainly simulates the effects of long-term exposure to natural or specific environments on materials throug

Product information

Ventilation aging test chamber is an experimental equipment used to accelerate the aging process of test materials in a specific gas environment. It mainly simulates the effects of long-term exposure to natural or specific environments on materials through high temperature and gas exchange. It is widely used for aging testing of materials such as rubber, plastic, coatings, wires and cables.

Product parameters

换气式老化试验箱		型号	ZWG2015-VT
工作室容积			150L
性能	温度范围		+20℃～+200℃
	温度偏差		≤±2.0℃
	温度波动		≤±0.5℃
	温度均匀度		≤2℃
	加热时间		环境温度到60 min内的+300℃
构造	外部材料		冷辊防锈钢板，甲拉胺树脂涂层
	内部材料		‌不锈钢板
	绝缘材料		玻璃棉，MG羊毛
	加热器		铁铬带线加热器
	空气循环器		不锈钢螺旋桨风扇
	制音器		循环通风（手动切换）
配件			电源电缆（距离腔室约2m），试样电源控制端子（继电器接触打开/停止，持续发生故障。电压容量250V AC3A)。
工作室尺寸		宽mm	500
		深mm	500
		高mm	600
试验箱外尺寸		宽mm	1350
		深mm	875
		高mm	1700
电源		AC380V±10%,50Hz±1三相四线+接地线（3/N/PE），接地电阻小于4Ω
最大电流		9.5A
使用环境条件		温度：0到+40℃ 湿度：至75%RH